During the past few years, much clamor has been brought forward on how existing natural resources have slowly dwindled down to alarming levels. Coupled with an increasing awareness on how current energy resources created a negative impact on the environment, more and more governments around the world are slowly shifting their focus towards energy conservation as well as alternative and cheap electricity sources.

In line with these efforts is the continuing drive towards creating more energy efficient homes that would pave the way towards achieving the perfect home of the future — a home that is so revolutionary that it can produce as much or even more energy than it can consume. This is in fact in alignment with the Department of Energy’s plan of building homes that are at least 70% more energy efficient.

What is an Energy Efficient Home?

An energy efficient home can be simply defined as a home that doesn’t waste energy or utilities, whether you’re in Dallas or Houston and consuming significant amounts of electricity. Appliances, facilities and other energy-consuming elements in an energy efficient home are working in an economically and ecologically-sound manner. The goal is to cut energy consumption by 50% or even more.

However, people need not wait for these advancements to materialize as they can start practicing certain habits in the home that will make it more energy efficient as some of these habits described below will do. People now have the power to select which practices they can do to save energy.

Ways to Make Your Home Energy Efficient

* Power your home with solar energy: Technological advances in this field have made energy production at home through solar energy a more viable and more economically sound alternative. Texas homes can save much on electricity by using solar energy systems in their homes. Solar panels in energy-efficient homes have entire sections of walls and the roof covered with solar panels that can harness the power of the sun and convert it to electricity.

* Use only energy efficient appliances: When choosing appliances, it would be well worth the investment if the item chosen are certified with an Energy Star seal, which means it is more energy efficient than standard ones and in fact can reach up to 90% less energy consumed. This includes air-conditioners, furnaces, refrigerators and other energy-consuming appliances in the home.

* Install energy saving devices: Certain gadgets are being introduced that can save energy if plugged into an electrical socket in the home. However, these devices can only handle 3000 watts and would need additional gadgets plugged in if the total wattage goes beyond this current limit.

* Make use of energy saving lighting: CFL’s or compact fluorescent lights can give the same amount of luminescence at much lower wattage consumption and can live to as much as 12 times longer than incandescent bulbs. These practices are even recommended by Houston or Dallas Electric Companies.

* Attach energy efficient windows: heat passing through windows can significantly increase energy consumption for heating and air-conditioning. e-Films are good additions to windows that can block off heat during summer, and prevent heat from escaping during winter. In relation to this, it would also be wiser to have your home properly insulated to minimize heat exchanges that occur during summer and winter.

Tagged with:
 

The Energy Star program is run by the US Environmental Protection Agency and the US Department of Energy. It is a great idea and has helped manufacturers move toward more energy efficient products in many different areas. Unfortunately though since it is a program paid for with tax dollars it has to be limited in scope or targeted so that the products it covers would be something that the majority of tax payers could see a benefit in.

It would be really great if Every product or innovation that reduced the energy required could be considered however such is not the case. Understandably the program is focused on general energy consumption of household products, washing machines, refrigerators, and materials used in home construction that reduce energy needs.

Some products used in the home, for example computers are included, others in particular pools and spas are not. Unfortunate considering the percentage of household energy consumption that goes into a pool or spa. We have even seen the Energy Star logo used in advertising spas even though the Department of Energy has clearly stated that it will not consider such a product for inclusion as an Energy Star Partner since the majority of taxpayers would not benefit from such a product.

Personally I would prefer that every tax payer would own at least one Hot tub. I can only see this as good for the country. If more people were spending more time in their spa they would be using less fuel driving around and have a lot less stress.

According to the findings of a 2004 study conducted by the Davis Energy Group sponsored Pacific Gas & Electric Co., pool and spa pumps are almost always the largest single electrical end-use (appliance in a home), using more than three times the energy of a new refrigerator. This same study found that the average residential pool pump consumes 2,600 kilowatt hours (kWh) annually with portable spas not far behind at 2,500 kWh per year.

With an estimated 1.2 million pools and about half a million spas the State of California by itself has to have the entire yearly output of one nuclear power plant plus one conventional power plant just to feed the consumption of pools and spas. It’s no wonder the California Energy Commission has recently approved new appliance efficiency regulations that for the first time include portable spas and a maximum allowable watt per hour usage.

As spa manufacturers struggle to meet these new requirements the bottom line for you the spa owner is how do you reduce the expense of operating your already purchased hot tub? Since most of the energy used in the spa is used keeping the water warm for the next time you want to dip into it, getting that water insulated is the key. If wrapping your water heater can make a difference in your energy bill, imagine what “wrapping” your other water heater (your spa) would do.

Your hot tub uses the same type of heater your household water heater does only your household water heater may have twice as many elements to heat up about forty gallons of water while your spa is trying to heat four hundred gallons. Good insulation around the sides and bottom of your spa play a vital role in helping keep that spa water warm. However most of the heat lost from your spa water is going straight up. Insulating the water with the best insulating cover makes the most sense.

With the new amendments of the California Appliance Efficiency Regulations, that state is taking the lead in setting tougher standards for the energy consumption of portable spas. Other states will no doubt follow suit. With the biggest use of energy going straight up out the top, looking for the best insulating spa cover will be the answer for the seriously energy conscious spa owner. The Energy Star may never be offered to spas or spa covers but it won’t be long before meeting the California Regulations for spa energy consumption will be equal to the best endorsement.

Tagged with:
 

Businesses need energy. Whether you are a tenant or you own your building, you typically need lighting; heating, ventilating and air-conditioning (HVAC); power for office equipment; and other services. With costs skyrocketing, today’s businesses are going green and saving cash and energy. How can you create an effective energy plan? Here are some ideas.

Contact your utility company. Ask if they offer free or inexpensive energy audits and/or rebates for energy-efficiency upgrades. Undertaking a comprehensive energy efficiency program, with the assistance of a professional if needed, can yield impressive savings. A useful website is Energy Crossroads, created by Lawrence Berkeley National Laboratory (Berkeley Lab), a member of the national laboratory system supported by the U.S. Department of Energy through its Office of Science. The site (http://eetd.lbl.gov/einfo-links.html) provides links to dozens of agencies that provide resources for energy conservation.

You can take action yourself. There are many reliable, high-return, low-risk, strategies that you can implement with little cost. Some are very simple, while others may take some investment.

LIGHTING

• Turn off lights and other equipment when not in use.

• Replace incandescent light bulbs with Energy Star compact fluorescent lamps (CFLs), wherever appropriate. CFLs cost about 75% less to operate, and last about 10 times longer.

• Adjust lighting to your actual needs and use free daylight.

• Do not “over-light.” Too much light can be as bad for visual quality as too little light, and it costs a lot more.

• Install switch plate occupancy sensors to automatically turn on lights when rooms are occupied, and off when people leave.

• Upgrade fluorescent lamp units to T8 (1″ diameter) tubes with solid-state electronic ballasts. These are more efficient than older T12 (1.5″ diameter) tubes with magnetic ballasts.

• Install Energy Star exit signs. These long-lasting exit signs can reduce lamp replacement and can save up to ten dollars per sign annually in electricity costs while saving up to 500 pounds of greenhouse gas emissions.

• Purchase Energy Star qualified products for your business. You’ll have the most efficient computers, printers, copiers, thermostats, ceiling fans, refrigerators, televisions, windows, and other equipment and appliances.

WATER

• Fix water leaks. Even small leaks add up to many gallons of water wasted each month.

• Use water-saving faucets, showerheads, toilets, and urinals.

• Install an insulation blanket on water heaters, and insulate at least the first three feet of the hot water “out” pipe.

• If buying a new water heater, consider a “tankless” water heater to reduce standby costs and waste.

• Set water temperature according to your local board of health code-usually between 110 and 120 degrees.

• Landscape using plants native to your region that require minimal watering and possess better pest resistance. If local code allows, consider diverting gray water for watering.

HVAC

• Maintain your HVAC system with an annual maintenance contract. Your system may last years longer and use less energy when properly serviced.

• Regularly change or clean HVAC filters during peak cooling or heating season.

• Control the amount of direct sun passing through windows according to the season and local climate. During cooling season, block direct heat gain from the sun shining through glass on the south side of the facility. Solar screens, solar films, and even old-fashioned awnings and vegetation can help. During heating season, these same south-facing windows can contribute solar heat gain during the day.

• Install an Energy Star qualified programmable thermostat to automate your HVAC system. A programmable thermostat can optimize HVAC operation based on your schedule, and can be overridden for unscheduled events.

• Use fans. Moving air can help delay or reduce the need for air conditioning, and a temperature setting of three to five degrees higher can feel as comfortable with fans. Fans can improve comfort and save energy year round.

• Plug leaks with weather stripping and caulking. You don’t need air-and heat-escaping through your leaky building.

THE NEXT STEP

Green power is electricity produced from renewable resources including solar, wind, low-impact biomass, geothermal, and low-impact hydro. If you want to be proactive about becoming a green facility, check out the Green Power Partnership, a voluntary program offered by the U.S. Environmental Protection Agency. The Green Power Partnership (http://www.epa.gov/greenpower/) supports the development of green power by offering expert advice, technical support, and resources.

For instance, do you know what fuel is used to generate the electricity used by your business? The EPA does. In just a few minutes you can enter your ZIP code and your power supplier and find out what mix of fuel is used by your supplier: non-hydro renewables, hydro, nuclear, gas, coal, or oil. The answer may surprise you.

Using EPA resources can help your business lower the costs of buying green power, reduce your carbon footprint, and demonstrate community leadership. Buying green power is one of the easiest and most effective ways to improve the environmental performance of your business.

© 2008 Thomas Hauck Communications Services

Tagged with:
 

It seems almost everyone has basement dampness problems. Where does all that water come from?

Humidity can enter your house naturally in the air, in warm weather through open doors and windows, and through air leakage when the heat or AC is on, such as poorly sealed windows and doors, cracks in exterior wall plaster in older houses, cracks in upstairs ceilings, or attic hatches that lack proper weatherstripping. Anything that draws air out of your house, such as a woodstove, exhaust fan, or a low- or mid-efficiency furnace, will also pull outdoor air in.

So one way you can reduce moisture is to restrict the flow of fresh air, especially during humid weather.

Water can enter through your basement walls from outside. You need to direct surface water away, seal the outside of the foundation, improve drainage below the foundation, and you may even need to seal the inside of the masonry wall as well.

Aspects of your own daily life such as breathing, sweating, showering and cooking, can also create moisture when the house is closed up. The daily activities of inhabitatns can add as much as 20 gallons of water a day to your house.

Rain collecting in your driveway, or pouring out of an eaves trough, makes its way downhill. If the soil is porous around your foundation, or if there is a gap between the pavement and the house, the water will percolate through the ground or the crack until it meets the water table or is otherwise halted. Once it can’t flow down, it flows across, which is when it starts seeping through your foundation walls.

So keep surface water away from the walls of your house. Keep eaves troughs cleaned out and properly angled, and downspouts in working order with their outflow running away from the house. Your driveway should slope away from your house, or you can run a line of mortar along the gap between the driveway and the house to keep water that accumulates in the driveway from working its way down along your foundation walls.

Gardens, lawns, and other surfaces should also draw water away from your home, and if you have a sump pump it should drain far from the house as well.

Protecting your basement from groundwater is a bit more challenging and can be expensive. A basement contractor can dig a trench to your foundation walls from outside, and apply a sealant to the exterior below-ground walls. They should also backfill the trench with gravel and sand to improve drainage, and they can put in drainage tile at the bottom to draw groundwater down below the floor of your basement.

A more affordable option, if you have exposed masonry in your basement, is to scrub down the masonry to a hard, clean surface free of grit or mineral sweat, and use a parging compound to add waterproofing on the inside of your walls. This works for minor humidity problems but won’t solve serious basement moisture problems.

Any moisture you can avoid producing indoors will help cut down on humidity problems. You can’t stop breathing, but you can cook with lids on, and turn on the range hood when boiling water; you can cut back on showers or run the bathroom fan when showering; and be mindful of aquariums, decorative fountains, and other possible humidity sources.

If winter humidity is a problemIf you have humidity problems in the winter and your home is recently built and well insulated, it is possible that your home is sealed too well. A well sealed home cuts your heating costs, but if it’s too well sealed moisture will build up, as will off-gassing from synthetics, woods, carpets, and other materials that may harm your health. You might consider buying a heat exchanger rather than a dehumidifier if this is your problem. Heat exchangers let air flow in and out of your house, while keeping the heat in as the exhaust air is blown out.

Before go out and buy a dehumidifier to solve moisture problems that can’t be solved by the tips above, you should understand how humidifiers work, their rankings, how ENERGY STAR dehumidifiers are ranked, and how to choose the best model for your situation.

Dehumidifiers remove moisture from the air using a compressor, condenser coils, and fan. They work the same way a refrigerator works, except that their cooling power is used to condense water out of the air. Dehumidifiers have a humidistat that keeps them on until the moisture reaches a set lower level, or until the tank fills up, whichever happens first.

Dehumidifiers are grouped based on extraction capacity — how much humidity they extract from the air per day — and by tank capacity — how much water they hold. In the United States, extraction capacity is rated in pints per day and capacity is measured in quarts. In most other countries, extraction capacity is rated in liters per day and capacity in liters.

Once your tank fills up, the dehumidifier will not extract any water from the air until you empty the tank. If you place your dehumidifier near a basement floor drain, you can run a hose from the tank to the drain, so that you never need to empty the tank. (Most dehumidifiers come with an opening for a hose.) If you can’t do this in the room where you’re putting the dehumidifier, make sure you buy a unit with adequate tank capacity.

The energy factor for dehumidifiers is the number of liters or pints of water removed from the air per kilowatt hour (kWh) of electricity used. The higher the energy factor value, the more efficient the dehumidifier is.  So bigger is better — unlike the efficiency rankings for most other types of appliances.

ENERGY STAR dehumidifiers have energy factors ranging from 3.56 (excellent) to 1.2 (marginally efficient) with a median rating of 1.62. Only two companies, Therma-Stor Products and Munters Corporation, make dehumidifiers with an energy factor better than 2.2.

But bear in mind that an ENERGY STAR rating does not mean the dehumidifier is all that efficient — just more efficient than some others in its class. For example, ENERGY STAR rated dehumidifiers can have an energy factor of as little as 1.2, while the best score is 2.02 and the worst for a non ENERGY STAR dehumidifier is 1.0.

Always buy a dehumidifier that can handle the amount of humidity in your house. You probably do not require a pints-per-day rating above 25 unless your basement is sopping wet and at least 1,200 square feet in area, wet and at least 1,500 square feet, or usually damp and mildewy (but not wet) with at least 1,800 square feet.

On the other hand, ENERGY STAR units that can withdraw more moisture are typically more energy efficient because of the different capacity thresholds used to rate dehumidifierS. So don’t skimp and buy too low a capacity unit — overestimate rather than underestimate.

If your basement is very cool, buy a dehumidifier built to handle lower temperatures. Otherwise, the cold basement will cause frost buildup on the coils, which reduces their efficiency and may cause the motor to short cycle. If notice this short cycling, turn the dehumidifier off until the ice has melted and fallen into the tank. If the behavior persists you may need to replace the unit with a unit built for cooler temperatures.

Assuming you do own or buy a new dehumidifier, you’ll want to reduce your energy costs with whatever dehumidifier you own.

If your basement is humid, and the dehumidifier is on, keep the doors to the basement closed so damp air doesn’t creep in from upstairs.

Keep your dehumidifier coils and fan clean and free of dust. Some dehumidifiers include a washable air filter you can clean to get rid of dust build-up; if you have one, keep it clean.

If you replace an old dehumidifier with a new, properly sized energy efficient dehumidifier, and you tackle your moisture sources as best you can, you could reduce your electricity use by half or even two thirds over what you were paying before for the same level of comfort. But more likely, you’ll use a little less energy with a new and improved dehumidifier, while controlling your humidity more effectively, or you’ll use more energy (if you didn’t have a dehumidifier) but you’ll be far more comfortable and won’t be spending a fortune on electricity.

With all the news surfacing about the health effects of indoor dampness and the resulting mold and mildew, you’ll definitely benefit from addressing your humidity problems and buying an energy efficient dehumidifier. You’ll save money and be healthier.

Tagged with:
 

With the current price of oil climbing to $145 per barrel, combined with gasoline ringing in at over $4 per gallon at the pump, Americans are looking to save on fuel costs any way possible. From hybrid, electric and smart cars (fortwo) to the four-day work-week mandated for government employees in Utah, everyone is looking for tips on how to increase fuel efficiency. One of the latest trends is called hypermiling, which is the technique of modifying your driving habits in order to increase your fuel efficiency.

History of Hypermiling

Hypermiling is a skillful method of driving that allows you to decrease your gas consumption, thus optimizing fuel efficiency. The term “hypermiler” is used to describe a group of drivers able to exceed the U.S. Environmental Protection Agency (EPA) estimates fuel efficiency on their automobiles by using driving techniques like “pulse and glide” and “ridge riding.” Basically, it is managing your momentum to conserve gas.

According to an article on MSNBC, the term “hypermiling” was first coined by Wayne Gerdes of Illinois, who achieved 84 mpg in a Ford Ranger pick-up, and an impressive 180 mpg in a hybrid electric Honda Insight. Obsessed with methods to increase fuel efficiency, Gerdes once drove 800 miles from Chicago to New York using less than nine gallons of gasoline. For his energy saving efforts, Mother Jones Magazine named him “the most fuel efficient driver in the world.”

Although hypermiling is often associated with hybrid vehicles due to its popularity among Prius owners, the techniques can be used to maximize your fuel efficiency in any automobile.

Increase Fuel Efficiency with Hypermiling Techniques

These basic hypermiling techniques can help to increase fuel efficiency:

? Keeping your tires inflated to the maximum pressure recommended by the manufacturer. Also, make sure to keep up with the proper maintenance of your vehicle’s engine control monitor, especially the oxygen sensor.

? Minimizing your vehicle’s weight by eliminating unnecessary items. Don’t drive around with items you don’t need in your back seat or trunk. The heavier your vehicle is, the more fuel you will use.

? Maintaining an efficient speed. According to fueleconomy.gov, your gas mileage decreases up to 10 percent for every 5 mph driven over 60 mph.

? Avoiding “jackrabbit” driving. Hypermiling.com estimates that drivers apply their brakes 10 to 25 percent more than needed. If you brake hard, and accelerate quickly, you use more fuel. Maintaining a buffer zone between you and surrounding vehicles enables you to coast to a stop, thereby increasing your fuel efficiency.

? Using trip computers to help you monitor your fuel efficiency. Products like ScanGauge and DashDyno SPD connect to your onboard computer and provide real-time feedback on your fuel economy performance. Using one of these trip computers can help you determine what hypermiling techniques work best for your vehicle and adjust your driving methods as needed.

More advanced hypermiling techniques include the “Pulse and Glide” – accelerating to a specific speed, followed by a period of coasting, then repeating the process. Note that the ability to increase your fuel efficiency with this hypermiling method will depend on the type of engine in your automobile. It is most effective in a hybrid vehicle, or one with a manual transmission.

There are several other advanced hypermiling techniques, but mastering the basics first will enable you to save on fuel by increasing your fuel efficiency.

Is Hypermiling Safe?

As many drivers have adopted techniques that place the importance of fuel economy over power and performance, a debate over the safety of hypermiling has surfaced.

Of course, properly maintaining your vehicle and eliminating unnecessary items from your trunk won’t affect road safety. However, there have been many reported cases of road rage due to drivers unfamiliar with hypermiling techniques, like coasting. Driving slower than the flow of traffic, even at legal speeds, can encourage tailgating and cause accidents. Drafting behind semi-trucks is another well-known, but unsafe technique (not endorsed by true hypermilers) that can lead to accidents. In addition, there are claims that drivers coasting in neutral have less control over their vehicle, thus increasing their reaction time during an emergency.

If you choose to employ hypermiling techniques to increase your fuel efficiency, use common sense and be a cautious driver. Be aware of your surroundings, including the other drivers on the road, the road conditions and traffic patterns. Never put yourself, or others, in jeopardy just to increase your gas mileage.

You can get more in-depth information on hypermiling by visiting Wayne Gerdes’ post on titled “Beating the EPA – The Why’s and How to Hypermile” on CleanMPG.com.

Tagged with:
 
Page 3 of 3123

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!

Visit our friends!

A few highly recommended friends...

© 2010 newpathenergy.com

Powered by Yahoo! Answers